Products

Camshaft service and repair hardware kit for BPW SN4218, SN3620 and SN3020 drum brakes. Contains components to repair one axle.

Steel split pin for BPW conventional hubs. Diameter: 8 mm. Length: 63 mm.

Replacement BPW D30 air spring bellows. Bellows only, not a complete air spring and piston assembly. Supplier dimensions: 300 mm diameter and 520 m...

Complete BPW D30 air spring assembly with a glass-fibre piston. Supplied with the air bellows, piston, threaded sleeve, mounting plate and assembly...

Complete BPW D30K air spring assembly, supplied with the air bellows, piston, threaded sleeve, mounting plate and assembly fasteners. This is the c...

Replacement BPW D36 air spring bellows made from UV-resistant rubber. Bellows only, not a complete air spring and piston assembly. Supplier dimensi...

Complete BPW D36 air spring assembly with a glass-fibre piston. Supplied with the air bellows, piston, threaded sleeve, mounting plate and assembly...

 Disc Brake Pad Set suits BPW SK Series (TSB4309) 2010 on & SKH Series (TSB4309) 2010

Hub seal for BPW ECO 10–12 tonne hubs. Supplier-specified dimensions: 135 x 156.7 x 8/10 mm.

Steel grease hub cap with M135 x 2 internal thread for compatible BPW ECO hubs. Height 70 mm; spanner width 110 mm.

Nylon dirt seal for BPW ECO 9 tonne hubs. Supplier dimensions: 103 x 147 x 15 mm.

Hub seal for BPW ECO H9000 hubs. Dimensions: 115 mm inside diameter, 137 mm outside diameter and 10.5 mm thickness.

Axle nut and washer kit for BPW ECO Plus 9–10 tonne axles. Supplied with the axle nut and washer. Across flats: 94 mm Inside diameter: 49 mm Width:...

Six-sided, 95 mm axle-nut socket for servicing BPW ECO Plus hubs. This item is a service tool, not a replacement axle nut.

Polyamide dust seal for BPW ECO Plus hubs. Supplied as an individual seal.

Steel hub cap for BPW ECO Plus hubs. M136 x 2.5 thread, 70 mm height and 110 mm spanner width.

Steel thrust washer for BPW ECO and ECO Plus hubs. Dimensions: 71 mm inside diameter, 108 mm outside diameter and 8 mm width.

BPW ECO-Li Plus long-life grease in a 20 kg container, developed for highly loaded taper roller bearings and commercial-vehicle hub units with exte...

Pair of BPW ECO-MAS automatic slack adjusters. Supplied as a two-adjuster set with the installation hardware shown in the supplier product image.

Steel bearing dust cover and oil catcher for BPW H9000 wheel ends. Dimensions: 84 mm inside diameter, 129 mm outside diameter and 8.5 mm height.

Steel lock tab washer for BPW ECO axle stubs. Dimensions: 53 mm inside diameter, 76 mm outside diameter and 5.8 mm thickness.

Steel bearing dust cover and oil catcher for BPW H91 and H10 wheel ends. Dimensions: 94 mm inside diameter, 148.5 mm outside diameter and 8.5 mm he...

Hardened hub seal carrier for BPW H91 and H10 ECO wheel ends. Supplied as a separate seal carrier.